消防管道抗震支架多远设置一个 How far to set a fire pipe seismic brace
发布时间:
2024-10-16
消防管道抗震支架的设置距离为12米安装一个侧向抗震支架,24米安装一个纵向抗震支架。这是根据相关规范要求的,适用于所有大于等于DN65以上的生活给水、消防管道系统。 The setting distance of fire pipeline seismic brace is 12 meters to install a lateral seismic brace and 24 meters to install a longitudinal seismic brace. This is according to the relevant specification requirements, applicable to all greater than or equal to DN65 above the domestic water supply, fire piping system.
消防管道抗震支架的设置距离为12米安装一个侧向抗震支架,24米安装一个纵向抗震支架。这是根据相关规范要求的,适用于所有大于等于DN65以上的生活给水、消防管道系统。
此外,抗震支架的安装还需要遵循一些规范和注意事项。例如,对于不同材质的管道,如刚性材质的管线和非刚性材质的管线,其抗震吊架的间距要求也有所不同。具体来说,刚性材质的管线,如沟槽连接管道、焊接钢管、钎焊铜管等,其横向吊架间距最大不得超过12米,纵向吊架间距最大不得超过24米;而对于非刚性材质的管线,如HDPE等,其横向吊架间距最大不得超过6米,纵向吊架间距也有相应的限制。
The setting distance of fire pipeline seismic brace is 12 meters to install a lateral seismic brace and 24 meters to install a longitudinal seismic brace. This is according to the relevant specification requirements, applicable to all greater than or equal to DN65 above the domestic water supply, fire piping system.
In addition, the installation of seismic brace also needs to follow some specifications and precautions. For example, for pipes of different materials, such as rigid material pipelines and non-rigid material pipelines, the spacing requirements of the seismic hangers are different. Specifically, for rigid material pipelines, such as trench connection pipelines, welded steel pipes, brazed copper pipes, etc., the maximum spacing of its transverse hangers shall not exceed 12 meters, and the maximum spacing of its longitudinal hangers shall not exceed 24 meters; for non-rigid material pipelines, such as HDPE, etc., the maximum spacing of its transverse hangers shall not exceed 6 meters, and the spacing of its longitudinal hangers is also subject to corresponding limitations.
最新新闻 News